Nonset 50/50SR/50 FF
Cement-based mortar for anchoring bolts, grouting and injection
AREA OF USE
Nonset 50 is an expanding mortar for grouting rock bolts, and can be used on ribbed bar, tubular, CT bolts etc. Also ideal for injection into wide cracks and grouting.
TECHNICAL CHARACTERISTICS
Nonset 50 is a thixotropic cement-based, non-settling dry mortar, which expands 1 – 3% before setting. Nonset 50 is composed of Portland cement, with Dmax. 0.2 mm expanding, plasticising and stabilising additives.
Nonset 50 SR is based on sulphate-resistant cement.
Nonset 50 FF (frost free) is a variant intended for use at temperatures down to -10°C.
The mortar requires only the addition of water. The expanding component makes the compound expand by 1 – 3% when fresh. Expansion ensures excellent cavity filling and packing around bolts. The compound must be placed no later than 40 minutes after mixing to obtain the full benefit of expansion. The expansion pressure does not affect the construction after binding.
Nonset 50 meets the requirements defined by EN 1504-9 “Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - General principles for the use of products and systems” and the minimum requirements claimes by EN 1504-6 “Anchoring reinforcement steel”.
COLOR - grey
PACKAGING
Nonset 50 is supplied in 25 kg sacks,1200 kg per pallet and 1000 kg big-bags.
STORAGE Must be stored dry, and can in original unopened packaging be stored for 12 months.
For further and complete information about the product please find Technical Data Sheet (TDS).
Nonset 50/50SR/50 FF
Cement-based mortar for anchoring bolts, grouting and injection
AREA OF USE
Nonset 50 is an expanding mortar for grouting rock bolts, and can be used on ribbed bar, tubular, CT bolts etc. Also ideal for injection into wide cracks and grouting.
TECHNICAL CHARACTERISTICS
Nonset 50 is a thixotropic cement-based, non-settling dry mortar, which expands 1 – 3% before setting. Nonset 50 is composed of Portland cement, with Dmax. 0.2 mm expanding, plasticising and stabilising additives.
Nonset 50 SR is based on sulphate-resistant cement.
Nonset 50 FF (frost free) is a variant intended for use at temperatures down to -10°C.
The mortar requires only the addition of water. The expanding component makes the compound expand by 1 – 3% when fresh. Expansion ensures excellent cavity filling and packing around bolts. The compound must be placed no later than 40 minutes after mixing to obtain the full benefit of expansion. The expansion pressure does not affect the construction after binding.
Nonset 50 meets the requirements defined by EN 1504-9 “Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - General principles for the use of products and systems” and the minimum requirements claimes by EN 1504-6 “Anchoring reinforcement steel”.
COLOR - grey
PACKAGING
Nonset 50 is supplied in 25 kg sacks,1200 kg per pallet and 1000 kg big-bags.
STORAGE Must be stored dry, and can in original unopened packaging be stored for 12 months.
For further and complete information about the product please find Technical Data Sheet (TDS).
Kur įsigyti