MAPEFLOOR FINISH 50 N

Two-component aliphatic transparent polyurethane finish for absorbent surfaces

WHERE TO USE

Mapefloor Finish 50 N has been specially developed to form a transparent, semi-gloss, protective, anti-dust, abrasion-resistant film, to be applied directly on both concrete floors and epoxy coatings in Mapefloor I 500 W or on cementitious floors produced from Ultratop.

Some application examples

  • Anti-dust and non-slip finish for concrete floors and Ultratop floors.
  • Final treatment for absorbent resin surface finishes such as Mapefloor I 500 W applied to industrial concrete floors for warehouses, supermarkets, the food, chemical, engineering and pharmaceutical industries, hospitals, exhibition centres and showrooms.

TECHNICAL CHARACTERISTICS

Mapefloor Finish 50 N is a semi-gloss, two-component finish. It is based on polyurethane, aliphatic, solvent free resin which does not yellow, developed in the MAPEI R&D Laboratories.

Mapefloor Finish 50 N may be applied with a roller, in layers from 60 µm to 100 µm. When it has set, an extremely hard-wearing layer is formed. If a non-slip finish is required, Mapefloor Finish 50 N may be mixed with 5-10% by weight of Mapefloor Filler.

Mapefloor Filler is made up of micrometric-fillers of extremely hard-wearing material. When Mapefloor Finish 50 N is applied directly onto the concrete substrate, it gives a darker wet-look effect to the floor.

COLOUR:

- Component A = transparent

- Component B = transparent

PACKAGING

10 kg unit:

– component A = 4.9 kg;

– component B = 5.1 kg.

STORAGE

The product can be stored for 12 months in its original packaging at a temperature between +5°C to +30°C.

For further and complete information about the product please find Technical Data Sheet (TDS).

 

 

MAPEFLOOR FINISH 50 N

Two-component aliphatic transparent polyurethane finish for absorbent surfaces

WHERE TO USE

Mapefloor Finish 50 N has been specially developed to form a transparent, semi-gloss, protective, anti-dust, abrasion-resistant film, to be applied directly on both concrete floors and epoxy coatings in Mapefloor I 500 W or on cementitious floors produced from Ultratop.

Some application examples

  • Anti-dust and non-slip finish for concrete floors and Ultratop floors.
  • Final treatment for absorbent resin surface finishes such as Mapefloor I 500 W applied to industrial concrete floors for warehouses, supermarkets, the food, chemical, engineering and pharmaceutical industries, hospitals, exhibition centres and showrooms.

TECHNICAL CHARACTERISTICS

Mapefloor Finish 50 N is a semi-gloss, two-component finish. It is based on polyurethane, aliphatic, solvent free resin which does not yellow, developed in the MAPEI R&D Laboratories.

Mapefloor Finish 50 N may be applied with a roller, in layers from 60 µm to 100 µm. When it has set, an extremely hard-wearing layer is formed. If a non-slip finish is required, Mapefloor Finish 50 N may be mixed with 5-10% by weight of Mapefloor Filler.

Mapefloor Filler is made up of micrometric-fillers of extremely hard-wearing material. When Mapefloor Finish 50 N is applied directly onto the concrete substrate, it gives a darker wet-look effect to the floor.

COLOUR:

- Component A = transparent

- Component B = transparent

PACKAGING

10 kg unit:

– component A = 4.9 kg;

– component B = 5.1 kg.

STORAGE

The product can be stored for 12 months in its original packaging at a temperature between +5°C to +30°C.

For further and complete information about the product please find Technical Data Sheet (TDS).

 

 

Susiję projektai