MAPEFLOOR I 357 ESD

Two-component, self-levelling epoxy formulation used to form electrically conductive dissipative coatings according to ESD requirements

WHERE TO USE

Mapefloor I 357 ESD is mainly used in particular to make conductive coatings according to ESD standard in
environments like:

• electronic industries;
• chemical and pharmaceutical industries;
• laboratories;
• hospitals and operating theatres;
• automotive and aerospace industries;
• sterile environments.

Consumption: 1.8-2.0 kg/m² of Mapefloor I 357 ESD for 1.5 mm of self-levelling layer. The maximum consumption is 2.5 kg/m².

Packaging: 20 kg kit:

• component A: 15 kg;
• component B: 5 kg.

Storage: 24 months in its original sealed packaging, in a dry area at a temperature between +5°C to +30°C. Protect from frost.

Mixing ratio: comp. A : comp. B = 3 : 1 by weight.

Consistency of mix: f|uid.

Workability time:
– at +10°C: approx. 40 min.
– at +20°C: approx. 25 min.
– at +30°C: approx. 15 min.