PURTOP EASY
Vieno komponento elastinga hidroizoliacinė poliuretano membrana
WHERE TO USE
For waterproofing:
- new roofs and repairs to existing roofs;
- terraces, balconies, walkways, and pedestrian areas in general;
- green roofs.
Purtop Easy can be applied on:
- concrete;
- cementitious screeds;
- ceramics;
- bre-cement boards;
- old bituminous membranes;
- metal.
ADVANTAGES
- Purtop Easy forms a highly elastic and durable membrane (Purtop Easy System Roof has a certied service life of 25 years according to ETAG 005).
- Purtop Easy is a one-component, ready-to-use product and is very easy to apply.
- When admixed with Purtop ADY, Purtop Easy can be applied in a single coat of 1.2 mm thickness, with improved mechanical properties and reduced drying time.
- Purtop Easy maintains its mechanical properties at temperatures down to -40°C.
RECOMMENDATIONS
- Do not apply Purtop Easy in temperatures lower than +5°C or higher than +35°C, or if it is about to rain.
- Do not apply if dew is present on the substrate.
- Do not apply Purtop Easy on substrates with residual humidity higher than 4% or subject to rising damp.
- Do not use on bituminous membranes that have only recently been applied (< 6 months). Always wait until the surface to be treated has completely oxidised.
- Purtop Easy is not suitable for surfaces that are continuously immersed.
Cleaning tools: It is recommended to clean tools with thinner before the product starts to set. Once hardened, cleaning can becarried out only mechanically.
Consumption: 2 kg/m² corresponds to approx. 1.2 mm dry thickness. In general, the consumption rates below are for a seamless lm on a at surface and will be higher on uneven substrates.
Packaging: 15 and 25 kg drums.
Storage: Purtop Easy can be stored for 12 months in its original packaging in a covered, dry area at a temperature of +15°C to + 35°C.
Consistency: thick liquid
Colour: white, grey
Density: 1.4 g/cm³
Recommended application temperature: +5°C to +35°C
Service temperature: -40°C to +80°C
Daugiau informacijos galite rasti Techninių duomenų lape (TDL).
PURTOP EASY
Vieno komponento elastinga hidroizoliacinė poliuretano membrana
WHERE TO USE
For waterproofing:
- new roofs and repairs to existing roofs;
- terraces, balconies, walkways, and pedestrian areas in general;
- green roofs.
Purtop Easy can be applied on:
- concrete;
- cementitious screeds;
- ceramics;
- bre-cement boards;
- old bituminous membranes;
- metal.
ADVANTAGES
- Purtop Easy forms a highly elastic and durable membrane (Purtop Easy System Roof has a certied service life of 25 years according to ETAG 005).
- Purtop Easy is a one-component, ready-to-use product and is very easy to apply.
- When admixed with Purtop ADY, Purtop Easy can be applied in a single coat of 1.2 mm thickness, with improved mechanical properties and reduced drying time.
- Purtop Easy maintains its mechanical properties at temperatures down to -40°C.
RECOMMENDATIONS
- Do not apply Purtop Easy in temperatures lower than +5°C or higher than +35°C, or if it is about to rain.
- Do not apply if dew is present on the substrate.
- Do not apply Purtop Easy on substrates with residual humidity higher than 4% or subject to rising damp.
- Do not use on bituminous membranes that have only recently been applied (< 6 months). Always wait until the surface to be treated has completely oxidised.
- Purtop Easy is not suitable for surfaces that are continuously immersed.
Cleaning tools: It is recommended to clean tools with thinner before the product starts to set. Once hardened, cleaning can becarried out only mechanically.
Consumption: 2 kg/m² corresponds to approx. 1.2 mm dry thickness. In general, the consumption rates below are for a seamless lm on a at surface and will be higher on uneven substrates.
Packaging: 15 and 25 kg drums.
Storage: Purtop Easy can be stored for 12 months in its original packaging in a covered, dry area at a temperature of +15°C to + 35°C.
Consistency: thick liquid
Colour: white, grey
Density: 1.4 g/cm³
Recommended application temperature: +5°C to +35°C
Service temperature: -40°C to +80°C
Daugiau informacijos galite rasti Techninių duomenų lape (TDL).
Kur įsigyti